Tint Removal Tools

One of the best qualities of vinyl is that it can be removed without damaging the paint beneath. This also means the paint that’s exposed when the vinyl is removed will look as bright as the day it was wrapped, having been protected from the elements. When you go to a wrap shop for removing your vinyl wrap you may find Professional Tinting Tools, vehicle wrapping tools and paint protection film tools.

With vinyl wraps, you can apply eye-catching graphics—or just colors and patterns that make a personal statement—them remove them when it’s time to sell the car (or update the design).

1. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
4. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

Kommentare